Sea Gull Lighting's Fire barrier lighting products are designed specifically for residential and commercial applications that require floor/ceilings to be one hour fire-rated. One recessed housing replaces the traditional field installed, fire resistant drywall fire barrier, simplifying the approval process for building inspectors, plus, the easy to install design reduces installation cost, time and the number of required subcontractors. Ideal for multi-family dwellings such as apartment buildings, assisted living communities, and medical facilities. IC Airtight 6" Fire Barrier Housing
Features four knockouts for wiring flexibility.
Easy to install with four screws.
Heavy 24 gauge galvanized steel enclosure. Patent pending design.
Secure to framing prior to drywall.
Maximum two fixtures within 36 sq. ft. area
Minimum O.C. fixture spacing of 24" within same truss cavity.
Minimum C.T.C. fixture spacing of 34" for adjacent truss cavity. Meets commercial building code safety standards for barriers.
Replaces the need for time consuming construction barriers on the job site.
Uses same trim selection as 1128.
Meets following fire-rated specifications: UL263, UBC 7-1, NFPA 251, and ASI A2.1.
Safe- Thermally Protected/Listed for Damp Location: IC housing is approved for use in direct contact with insulation.
Airtight Construction: Meets airtight requirements for 2.0 CFM or less air leakage.
Housing Adjustment: Housing adjusts vertically for various ceiling thicknesses.
Adjustable socket assembly provides flexibility in lamping options and precise lamp placement with various trims.
Junction Box with Integral Romex Connector: Junction box with integral romex connector, quick-push and lock connector and through circuit wiring with 4 in, 4 out No. 12 wire, saves installation time.
Bar Hanger Locking Screws: Tighten screws to lock bar hangers in place.
One hour-rated fire barrier certified to ASTM E-119.