WAC Lighting - 5121 - 8W 1 LED Miniature Wall Wash-4.5 Inch Tall and 2.88 Inch Wide

Function meets durability with this LED wall wash, available in 12V or 120V and 2700K or 3000K color temperatures. A twist of the light engine inside of the housing at indexed intervals allows fixed beam angle adjustment from flood to spot while a mechanical dial at the base of the light engine provides smooth integral brightness control. The light engine can be tilted in two 15 degree intervals and rotated to cast light in any direction. One sku fits most applications, eliminating the need to choose from dozens of light bulbs with varying light outputs when compared with traditional landscape lights. This well light has a removeable cover that is gasketed to create a water tight seal with IP66 rating for protection against high-pressure water jets and outdoor elements. Includes a 3ft lead wire with two gel filled direct burial wire nuts. Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments. Solid brass coated in bronze (-BBR finish) is available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.

• Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Solid brass coated in bronze (-BBR finish) is available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.
• This wall wash light is factory sealed and water tight with an IP66 rating that provides protection against high-pressure water jets and outdoor elements.
• A mechanical dial at the base provides smooth integral brightness control and the Mini Wall Wash (SKU # 5021) includes a Second mechanical dial to toggle between 2700K and 3000K color temperatures.
• Includes a 9in mounting spike for 12V fixtures (120V fixtures require Sku# M6000-STAKE, power stake sold separately) and a 3ft lead wire with two gel filled direct burial wire nuts. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.
• High Powered LED, Input: 9-15V AC, Power: 2-16W (23VA), Brightness: 190-980Lm, Beam Angle: 80Deg, CRI: 85, Rated Hours: 70,000. CCT: 27000K or 3000K order accordingly (Note 5121 Mini Accent includes dual-CCT). Smooth and continuous dimming with a Magnetic Low Voltage dimmer (MLV).
• Standards: UL & cUL 1838 and IP66 Rated for Wet Locations (See Specification Sheet for complete details).